UO-EGS / UO-SGS Speed Switch Module

Description

UO-EGS / UO-SGS

U-ONE Generation II (LWL) – speed switch module

System solution U-ONE(-SAFETY)-LWL

Monitor overspeed and underspeed by means of 3 configurable speed switches equipped with positively driven relays
Easy configuration instead of complicated PLC programming
Switching capacity up to 250 VAC / 500 mA or 230 VDC / 180 mA
Options: Without SIL/PL certification (UO-EGS-R); combine up to 6 speed switches (= 2 modules)

Description

U-ONE Generation II (LWL) – speed switch module

The speed switch modules of the U-ONE(-SAFETY) second generation are electronic overspeed switches that monitor the defined speeds for overspeed and underspeed. They are equipped with hysteresis, a switching delay, a switching function dependent on the direction of rotation and the option of performing a switch test and can be parameterized as reliable error switches. The parameterization is carried out using input masks, meaning that complex SPS programming is not necessary. The modules are optionally available as certified up to SIL 2 / PL d.

Technical Data

Supply voltage	Power supplied via controller module
Signal outputs/Interfaces	3 configurable speed switches, 2 NO contacts per switch, potential-free relay contacts with switching capacity: 5…250 V / 5…500 mA AC 5…30 V / 5…500 mA DC 30…230 V / 5…180 mA DC 1 switch configurable as error switch (e. g. emergency stop circuit) Configurable functions: Hysteresis, delay, switching independent of rotational direction, safe error switch, switch test diagnostics LED indicators: Operating conditions/warning
Electrical connection	Number of screw terminals and function: 4: Switch S1 (each 2 NO contacts) 4: Switch S2 (each 2 NO contacts) 4: Switch S3 (each 2 NO contacts) Internal bus connection to preceding and following modules
Dimensions	100 x 25 x 110 mm (modular electronics housing for DIN rail bus connector)
Device temperature range	-25 °C to +60 °C
Degree of protection	IP20 (switchboard installation)
Device options	Combines with other modules belonging to the U-ONE(-SAFETY)-LWL-System Combines up to 6 speed switches (= 2 modules) Maximum 15 switches per system, of which maximum 6 speed switches
Mechanical options	–
Special features and certificates	USL(H) 42 and associated modules UO-S…: SIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849)