FGHJ 5 Incremental Hollow-shaft Encoders Insulation

Description

FGHJ 5

Incremental hollow shaft encoders with insulation

  • Hollow shafts with isolated bearing assembly for shafts up to Ø 40 mm
  • B14 flange as basis to attach 2 more devices
  • Up to 2500 pulses HTL / TTL
  • Options: FOC transmitter, further signal options

Incremental encoders

Hollow shaft encoders with insulation

 

The incremental, hollow shaft encoders FGHJ 5 are ideally suitable for use on inverter-controlled drives where shaft currents are a concern. Amongst others, applications are found in mining operations where they can be installed between the motor and fan to save space. The connection technology is accommodated in an external terminal box. The extremely rugged encoders offer a hollow shaft diameter of 40 millimeters and a stable, ribbed aluminium housing.

Technical Data

 

Supply voltage 12-30 VDC (5 VDC optional)
Signal amplitude HTL or TTL
Pulse rate 512, 1000, 1024, 1200, 1800, 2000, 2048, 2500
Output signals 0° track
Maximum frequency Hollow shaft: up to 1100 rpm / max. 100 kHz
Electrical connection
  • Terminal box (copper cable or FOC connection)
  • Plug-in connector (circular connector / industry quality connector)
  • Preinstalled connection cable
Construction type / Ø shafts Hollow shaft (isolated bearings) / up to Ø 40 mm with feather key
Device temperature range -25 °C to +85 °C
Degree of protection Up to IP66
Weight Approx. 7.5 kg
Device options
  • FOC: Encoder signals transmitted via a fiber optic cable
  • 90: Second pulse track as basic track, however, electrically phase shifted by 90°
  • N/N2: Mechanically fixed reference pulse (N), one square-wave pulse per revolution, with inverted signal
  • G: Additional inverted output signals for basic track, 90° track, reference pulse including LED indication
  • 2F: Twice as many basic track pulses by combining the 0° and 90° tracks
  • B: Rapid direction of rotation sensing at each edge of 0° and 90° tracks
  • B2: Rapid direction of rotation sensing at each edge of 0° and 90° tracks; additional standstill detection
  • V: Electronic doubling of the basic track and 90° track pulses through multiple evaluation
  • L2: 150 mA power output for basic track, 90° track and their associated inverted signals
  • J: Optically adjusted pulse disk for reduced rotational frequency modulation
Mechanical options
  • B14 flange for attachments
  • Torque bracket (on request)
Special features and certificates

Downloads

 

FGH 5/6/8/14 (de/en)
Catalogs

 

FG … (en)
Inquiry forms

 

FGHJ 5 (en)
Operating and assembly instructions

 

FGH / 5 / 6 / 8 / 14 (de/en)
EC declaration of incorporation