UO-ECU / UO-SCU Controller Module

Description

UO-ECU / UO-SCU (controller module)

U-ONE Generation II (LWL) – controller module

System solution U-ONE(-SAFETY)-LWL

Easy configuration instead of complicated PLC programming
Fast adjustment via digital preset input
Status monitoring via digital status and error output
Options: Without SIL/PL certification (UO-ECU / UO-ECU-G); additional incremental and 4 – 20 mA output without SIL/PL (UO-SCU-G / UO-ECU-G)

Description

U-ONE Generation II (LWL) – controller module

The controller modules of the U-ONE(-SAFETY) second generation monitor the status of the entire universal encoder system. The parameterization is carried out using input masks, meaning that complex SPS programming is not necessary. A digital preset input enables the system to be quickly activated and set. The controller module is also optionally available with an additional incremental output for the speed measurement, current output for real-time data, and is certified up to SIL 2 / PL d.

Technical Data

Supply voltage	12-30 VDC
Signal outputs/Interfaces	USB 2.0 interface: Adjustable parameters LED indicators: Operating conditions/warning Optional (without SIL / PL): Incremental output (HTL) and current output (4 … 20 mA)
Electrical connection	1 x ST connectors FOC (50/125 µm or 62.5/125 µm) Number of screw terminals and function: 2: Supply voltage (+, -) 2: Reset (CH 1, CH 2) 2: Preset (CH 1, CH 2) 2: Status (CH 1, CH 2) 2: Error (CH 1, CH 2) 4: Option incremental output (0°, 90°, each inverted) 2: Option current output (4…20 mA) USB 2.0 programming interface Mount on DIN rails to EN 50022 with height of 35 mm (Exchange without disassembly of all modules)
Dimensions	100 x 25 x 110 mm (modular electronics housing for DIN rail bus connector)
Device temperature range	-25 °C to +60 °C
Degree of protection	IP20 (switchboard installation)
Device options	Combines with other modules belonging to the U-ONE(-SAFETY)-LWL-System Additional options (without SIL / PL): Real-time data: Current output 4 … 20 mA, configurable for speed and position Speed measurement: Incremental output 512, 1024, 2048 or 4096 ppr configurable
Mechanical options	–
Special features and certificates	USL(H) 42 and associated modules UO-S…: SIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849) Easy configuration instead of complicated PLC programming Fast adjustment via digital preset input Status monitoring via digital status and error output