UO-EM-FG4 Universal Encoder Systems

Categories: Incremental encoders, Sensor Systems, Universal encoder systems

Description

Description

UO-EM-FG4 (incremental encoder module)

Universal encoder systems

Output of speed-dependent square wave pulses
1024 pulses per rotation / HTL or TTL
Output signals 0°, 90°, reference pulse and inverted signals
Transmission frequency up to 100 kHz / overload display

UO-EM-FG4 1

UO-EM-FG4 3

UO-EM-FG4 2

Description

The speed signallers

The incremental encoder modules for detecting speed offer three types of signals: shifted 90 degrees to the basic pulse phase, mechanically fixed reference pulse and inverted signals.

Technical Data

Technical Data

Supply voltage	12-30 VDC
Signal outputs/Interfaces	HTL or TTL (0°, 90°, N, ERR and respective inverted) Pulse rate: 1024 Maximum frequency: 100 kHz LED indicator: Overload at outputs
Electrical connection	Screw terminals to connect the incremental output signals Series connectors to preceding and following modules (internal bus connection)
Dimensions	99.5 x 22.5 x 114.5 mm (modular electronics housing for DIN rail)
Device temperature range	-25 °C to +70 °C
Degree of protection	IP20 (switchboard installation)
Device options	Combines with other modules belonging to the U-ONE System
Mechanical options
Special features and certificates	UL/CSA

Downloads

Downloads

UOM 4L / UOM 41L (de/en)

Catalogs

Simplifying Cranes (de-en)

Catalogs

UO EM FG4 (en)

Operating and assembly instructions

UOM 4L / UOM 41L basic unit + module (de/en)

Software i

UL / CSA (de/en)

Certificate

Accessories