UO-EM-AM Absolute Encoder Module

Description

UO-EM-AM…

U-ONE Generation I – absolute encoder module

System solution U-ONE

UO-EM-AMC, UO-EM-AMP, UO-EM-AMS, UO-EM-AME/M

Output of absolute position values
12 bit singleturn / 12 bit multiturn
Interfaces: PROFIBUS, CAN bus, Ethernet Modbus, SSI
Different programmable parameters

Description

U-ONE Generation I – absolute encoder module

The absolute encoder modules output the absolute position values of the shaft being monitored. Depending on the version they are suitable for PROFIBUS, CAN bus, Ethernet Modbus and SSI interfaces. The programmable parameters reference the counting direction, the preset value as well as the lower and upper limit switches.

Technical Data

Supply voltage	12-30 VDC
Signal outputs/Interfaces	CAN-Bus \| UO-EM-AMC PROFIBUS-DP \| UO-EM-AMP SSI \| UO-EM-AMS Modbus TCP \| UO-EM-AME/M Resulotion: 12 Bit Singleturn / 12 Bit Multiturn
Electrical connection	Screw terminals / connectors for bus connections Series connectors to preceding and following modules (internal bus connection)
Dimensions	UO-EM-AMC / UO-EM-AMS / UO-EM-AME/M: 99.5 x 22.5 x 114.5 mm (modular electronics housing for DIN rail) UO-EM-AMP: 99.5 x 45 x 114.5 mm (modular electronics housing for DIN rail)
Device temperature range	-25 °C to +70 °C
Degree of protection	IP20 (switchboard installation)
Device options	Combines with other modules belonging to the U-ONE System
Mechanical options
Special features and certificates	UL/CSA