FGH 14 Optical Rotary Encoders - Hollow-shaft 150mm

Description

FGH 14

Optical rotary encoders with hollow shaft up to 150 mm

Hollow shafts up to Ø 150 mm
B14 flange as basis to attach 4 more devices
Up to 3600 pulses HTL / TTL
Options: Second signal output, FOC transmitter, overspeed switch, further signal options, maintenance-friendly replacement scanning head

Description

Optical rotary encoders for main drives

The incremental encoders FGH 14 for continuous hollow shafts up to Ø 150 mm are mostly mounted directly onto the shaft. Thanks to the flat design they are ideally suitable for attaching further sensors such as speed switches, absolute encoders or combinations of these. Furthermore, there is also the option of a redundant configuration with two equal scanning systems and evaluation electronics. That increases safety or facilitates the provision of separate signals to the motor controls and a higher-level controller. The maintenance-friendly replacement scanning head facilitates simple changeover without separating the motor and gearing.

Technical Data

Supply voltage	12-30 VDC
Signal amplitude	HTL or TTL
Pulse rate	720, 1000, 1024, 1800, 3000, 3600
Output signals	0° track
Maximum frequency	Hollow shaft: up to 2500 rpm (up to 800 rpm with IP66) / max. 100 kHz
Electrical connection	Terminal box (copper cable or FOC connection) Plug-in connector (circular connector / industry quality connector) Preinstalled connection cable
Construction type / Ø shafts	Hollow shaft / up to Ø 150 mm
Device temperature range	-25 °C to +85 °C
Degree of protection	Up to IP66
Weight	Approx. 32 kg
Device options	Redundant version (KK) with second terminal box S: Electronic overspeed switch with two mutually independent, programmable switching points FOC: Encoder signals transmitted via a fiber optic cable 90: Second pulse track as basic track, however, electrically phase shifted by 90° N/N2: Mechanically fixed reference pulse (N), one square-wave pulse per revolution, with inverted signal G: Additional inverted output signals for basic track, 90° track, reference pulse including LED indication 2F: Twice as many basic track pulses by combining the 0° and 90° tracks B: Rapid direction of rotation sensing at each edge of 0° and 90° tracks B2: Rapid direction of rotation sensing at each edge of 0° and 90° tracks; additional standstill detection V: Electronic doubling of the basic track and 90° track pulses through multiple evaluation L2: 150 mA power output for basic track, 90° track and their associated inverted signals J: Optically adjusted pulse disk for reduced rotational frequency modulation
Mechanical options	B14 flange for attachments Maintenance-friendly replaceable scanning head Torque bracket (on request)
Special features and certificates	UL/CSA