EGS 40 / EGSH(J) 40 Modernisation Main Drives

Description

EGS 40 / EGSH(J) 40

Speed switch / overspeed switch / speed monitor

Monitor overspeeds and underspeeds (programmable)
Hollow shafts up to Ø 25 mm, solid shafts up to Ø 14 mm (flange or foot mounting)
Relay contact / switching output: Up to 4 programmable / up to 2 diagnostics
Options: Isolated ball bearings (hollow shaft), additional incremental output, further encoders attachable

Description

Speed switch / overspeed switch / speed monitor

The electronic speed switches (overspeed switches) monitor as many as 4 programmable speed ranges (overspeed, underspeed and standstill) with a high level of switching accuracy, including at low operating speeds. If a programmed speed is exceeded or is too low, the respective switching output switches. As a consequence, the speed switches play their part in system and personnel protection. The speed monitors are installed on motors on cranes, in mining operations as well as in rolling mills and more. When devices are swapped it is possible to transfer the parameters previously stored on the first device to the new device.

Technical Data

Supply voltage	12-30 VDC or 100-240 VAC
Number of switches	2 or 4
Switching voltage	2-30 VDC or 30-230 VAC/DC
Switching speed range	0.63-6000 rpm with solid shaft 0.63-4000 rpm with hollow shaft
Switching function	Speed monitoring: Opens when switching speed exceeded or fallen below Additional functions: Direction of rotation switch, switching hysteresis (min. 10%), switching delay (0-300 ms), … Programming via the selected switching speed range (interface: Mini USB)
Maximum rotation	Up to 6000 rpm with solid shaft Up to 4000 rpm with hollow shaft
Electrical connection	Terminal strip in a terminal box Fixed cable (0.6-3 m) 12-pole round connector Burndy 15-pole industrial connector
Construction type / Ø shafts	Solid shaft (B5, B35): Ø 11 mm, Ø 14 mm with feather key Hollow shaft / Ø 16 mm, Ø 19 mm, Ø 20 mm with keyway; Ø 16 mm, Ø 25 mm with clamp
Device temperature range	0 °C to +70 °C -25 °C to +85 °C -40 °C to +85 °C (on request)
Degree of protection	Up to IP66 / IP67
Weight	Approx. 3.5 kg
Device options	Incremental output: See FG 40 with option S
Mechanical options	Second shaft end with B14 flange for attachments (solid shaft construction type only) Additional foot (solid shaft construction type only) Isolated ball bearing (hollow shaft construction type only) MI: Saliferous environment MS: Wet areas in rolling mills Hollow shaft devices: Torque bracket (on request)
Special features and certificates	UL/CSA (for all devices with connection technology „Terminal strip in a terminal box“ and up to 30 V supply voltage / switching voltage)

Downloads

EGS 2 / 40 / 41 (de/en)

Catalogs

PDF, 2.13 MB

EGS 2 / 40 / 41 (en)

Inquiry forms

PDF, 530 KB

EGS 40 / EGSH(J) 40 (en)

Operating and assembly instructions

PDF, 2.96 MB

EGS 40 / EGSH(J) 40 (de/en)

Software i

ZIP, 8.31 MB

UL / CSA (de/en)

Certificate

PDF, 233 KB

Solutions

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.